1. N. Daryanes, A. S. Priyadarshini, R. Raju, V. Sivalingam, V. Revathi, A. Somaiah, and A. Kumar, "Influence of printing time reduction on dimensional accuracy of final build FDM parts by modifying the G-code program," Int. J. Interact. Des. Manuf., vol. 2, no. 1, pp. 1-2, Jul. 2024. (ESCI & Scopus Indexed IF 2.1)

2. U. G. Udayakumaran, T. K. Gandhi, R. Raju, R. Bansal, J. Kukade, V. Barpha, K. K. Saxena, S. M. Panchal, and B. Bhavani, "Study of phase equilibrium of refractory high-entropy alloys using the atomic size difference concept for turbine blade applications," High Temp. Mater. Processes, vol. 43, no. 1, pp. 20240006, May 2024. (SCIE & Scopus Indexed IF 1.4)

3. V. Sivalingam, H. Liu, S. Tiwari, P. G. Kumar, M. Sun, G. Kai, M. K. Gupta, A. Eltaggaz, and R. Raju, "Effect of reinforced particles on the machinability of Al alloy under MQL, cryogenic, and hybrid lubrication," Int. J. Adv. Manuf. Technol., vol. 1, no. 1, pp. 1-3, Apr. 2024. (SCIE & Scopus Indexed IF 2.9)

4. D. Naresh, R. Raju, and S. Parveen, "Design and development of alternate layer printing method to reduce the porosity in FDM printing process," Int. J. Interact. Des. Manuf., 2023. [Online]. Available: https://doi.org/10.1007/s12008-023-01624-x. (ESCI & Scopus Indexed IF 2.1)

5. Y. Darji, D. Patel, D. Patel, and R. Ramesh, "Experimentation with the EDM parameter through a full factorial technique and optimization using regression analysis with carbon nanotubes," Int. J. Interact. Des. Manuf., 2023. [Online]. Available: https://doi.org/10.1007/s12008-023-01263-2. (ESCI & Scopus Indexed IF 2.1)

6. U. C. Pawar, S. G. Chavan, K. S. Bhole, R. Ramesh, and A. D. Oza, "Optimization of roll forming process for different standard sections of steel structures," Int. J. Interact. Des. Manuf., vol. 3, no. 1, pp. 1-3, Nov. 2022. (ESCI & Scopus Indexed IF 2.1)

7. R. Saxena, A. Mandal, S. Chattopdhya, A. D. Oza, A. Kumar, and R. Ramesh, "Experimental investigation of electrochemical discharge drilling (ECDM-D) performance characteristics for N-BK7 glass material," Int. J. Interact. Des. Manuf., vol. 2, no. 1, pp. 1-2, Oct. 2022. (ESCI & Scopus Indexed IF 2.1)

8. S. Dewangan, S. K. Selvaraj, T. M. Adane, S. Chattopadhyaya, G. Królczyk, and R. Raju, "Metallographic Investigation on Postweld Heat-Treated 0.21% C-1020 Steel Plates Joined by SMAW Method," Advances Mater. Sci. Eng., vol. 2022, no. 1, pp. 1-12, 2022. (SCIE & Scopus Indexed IF 2.031)

9. R. S. Darji, G. R. Joshi, S. Hembrom, M. Kumar, S. M. Shinde, and R. Ramesh, "Powder mixed electrical discharge machining of Inconel 718: investigation on material removal rate and surface roughness," Int. J. Interact. Des. Manuf., vol. 2, no. 1, pp. 1-5, Oct. 2022. (ESCI & Scopus Indexed IF 2.1)

10. S. M. Shinde, M. Diwan, R. S. Niranjan, S. Vaikole, and R. Ramesh, "Geometric optimization of compressor head fin body for effective heat transfer by finite element method," Int. J. Interact. Des. Manuf., vol. 2, no. 1, pp. 1-2, Oct. 2022. (ESCI & Scopus Indexed IF 2.1)

11. P. Thejasree, K. L. Narasimhamu, M. Natarajan, and R. Raju, "Generative modelling of laser beam welded Inconel 718 thin weldments using ANFIS based hybrid algorithm," Int. J. Interact. Des. Manuf., vol. 3, no. 1, pp. 1-9, Jul. 2022. (ESCI & Scopus Indexed IF 2.1)

12. S. K. Sharma, H. S. Grewal, K. K. Saxena, K. A. Mohammed, C. Prakash, J. P. Davim, D. Buddhi, R. Raju, D. G. Mohan, and J. Tomków, "Advancements in the Additive Manufacturing of Magnesium and Aluminum Alloys through Laser-Based Approach," Materials, vol. 15, no. 22, pp. 8122, Nov. 2022. [Online]. Available: https://doi.org/10.3390/ma15228122. (SCIE & Scopus Indexed IF 3.623)

13. A. Francis, K. G. Thirugnanasambantham, and R. Ramesh, "High-temperature erosion and its mechanisms of IN-738 superalloy under hot air jet conditions," Int. J. Interact. Des. Manuf., 2022. [Online]. Available: https://doi.org/10.1007/s12008-022-01013-w. (ESCI & Scopus Indexed IF 2.1)

14. K. G. Thirugnanasambantham, A. Francis, and R. Ramesh, "Investigation of erosion mechanisms on IN-718 based turbine blades under water jet conditions," Int. J. Interact. Des. Manuf., 2022. [Online]. Available: https://doi.org/10.1007/s12008-022-00910-4. (ESCI & Scopus Indexed IF 2.1)

15. S. Marimuthu, M. Natarajan, and R. Ramesh, "Hollow three-dimensional model for fuel reduction in aviation industry," Int. J. Interact. Des. Manuf., 2022. [Online]. Available: https://doi.org/10.1007/s12008-022-00883-4. (ESCI & Scopus Indexed IF 2.1)

16. N. Manikandan, J. S. Binoj, K. C. Varaprasad, S. Sree Sabari, and R. Ramesh Raju, "Optimisation of spark erosion machining process parameters using hybrid grey relational analysis and artificial neural network model," Int. J. Machining Machinability Mater., vol. 22, no. 1, pp. 1-23, 2020. (Scopus Indexed)

17. D. Palanisamy, K. Balasubramanian, N. Manikandan, D. Arulkirubakaran, and R. Ramesh Raju, "Machinability analysis of high strength materials with Cryo-Treated textured tungsten carbide inserts," Mater. Manuf. Process., vol. 34, no. 5, pp. 502-510, 2019. (SCIE & Scopus Indexed IF 4.8)

18. R. Ramesh Raju, V. Sivalingam, J. Sun, M. Natarajan, and Y. Zhao, "Experimental and Taguchi-Based Grey Approach of Laser Metal Deposition Technique on Nickel-Based Superalloy," Trans. Indian Inst. Metals, vol. 72, no. 1, pp. 205-214, 2019. (SCIE & Scopus Indexed IF 1.5)

19. D. Arulkirubakaran, K. Balasubramaniyan, R. Raju, D. Palanisamy, and N. Manikandan, "Machinability Studies on Precipitation hardened Stainless Steel Using Cryo-Treated Textured Carbide Inserts," J. Sci. Ind. Res., vol. 78, pp. 216-222, 2019. (SCIE & Scopus Indexed IF 0.7)

20. N. Manikandan, D. Arulkirubakaran, D. Palanisamy, and R. Ramesh Raju, "Influence of wire-EDM textured conventional tungsten carbide inserts in machining of aerospace materials (Ti–6Al–4V alloy)," Mater. Manuf. Process., vol. 34, no. 1, pp. 103-111, 2019. (SCIE & Scopus Indexed IF 4.8)

21. V. Sivalingam, J. Sun, B. Yang, K. Liu, and R. Ramesh, "Machining Performance and Tool Wear Analysis on Cryogenic Treated Insert during End Milling of Ti-6Al-4V Alloy," J. Manuf. Process., vol. 36, pp. 188-196, 2018. (SCIE & Scopus Indexed IF 6.1)

22. K. G. Thirugnanasambantham, R. Ramesh, T. Sankaramoorthy, P. Velmurugan, A. Kannagi, M. C. K. Reddy, V. S. Koushik Chary, M. A. Mustafa, and V. Ramesh Chandra, "Degradation mechanism for high-temperature sliding wear in surface-modified In718 superalloy," Cogent Eng., vol. 5, no. 1, pp. 1501864, 2018. [Online]. Available: https://doi.org/10.1080/23311916.2018.1501864. (ESCI & Scopus Indexed IF 2.1)

23. N. Jeyaprakash, M. Duraiselvam, and R. Ramesh, "Modelling of Cr3C2–25% NiCr laser alloyed cast iron in high temperature sliding wear condition using response surface methodology," Arch. Metall. Mater., vol. 63, no. 3, pp. 1303-1315, 2018. (SCIE & Scopus Indexed IF 0.7)

24. V. Dillibabu, M. Duraiselvam, U. Chandrasekhar, and R. Raju, "Microstructural studies on laser dissimilar welded Ni and steel alloys for aeronautical turbine applications," Lasers Eng., vol. 37, no. 4-6, pp. 247-260, Jul. 2017. (SCIE & Scopus Indexed IF 0.538)

25. R. Raju, M. Duraiselvam, V. Petley, S. Verma, and R. Rajendran, "Microstructural and mechanical characterization of Ti6Al4V refurbished parts obtained by laser metal deposition," Mater. Sci. Eng. A, vol. 643, pp. 64-71, 2015. (SCIE & Scopus Indexed IF 6.4)

International and National Conferences:

Ramesh Raju, KG.Thirugnanasambantham, Ravi Lakshmanan, Sivakumar Paramasivam, D. Giridhar, “Effect of Agglomeration in Carbon Nanotube (CNT) Reinforced Aluminium(AL) Composites: A Review”, International Online Conference on Sustainable Innovation in Engineering and Technology 2023 – SIET 2023, 16th August 2023, Asia Pacific University of Technology & Innovation (APU), Kuala Lumpur, Malaysia.

Sai Mokshith Sake, T. Likhitha, Lavan Nayak, Nihitha, Ramesh Raju, “Additive Manufacturing Techniques for Biomedical Applications: A Critical Review”, International Conference on Smart And Innovative Development in Science, Engineering & Technology – SIDSET 23, 16 – 18 August 2023, Bhilai Institute Of Technology, Durg, India.

M. Murali M K Varma, Pushp Kumar Baghel, Ramesh Raju, “Optimization of Process Parameters for 3D Printing Process Using Taguchi Based Grey Approach”, International Conference on Advanced Materials & Modern Manufacturing - ICAMMM -2022, 25 - 27 March 2022, Adhi College of Engineering and Technology, Chennai, India.

R Ramesh, A. Karpagaraj, V. Sudharsan, S. Neeraja, “Shape Memory Alloy Manufacturing By Laser And Challenges In Machining”, National Conference on Optimization Techniques and Recent Innovations in Design, Manufacturing and Thermal Engineering- NCRIDMT -2020, pp. 47 – 51, 13 June 2020, SREC, Nandyal, India.

Ramesh Raju, N. Manikandan, J. S. Binoj, Palanisamy D, D. Arulkirubakaran, “Effect of carbon particles on structural properties of PLA polymer material”, International Conference on Advanced Materials and Modern Manufacturing, ICAMMM, 29 - 30 May 2020, Adhi College of Engineering and Technology, Chennai, India. 

Ramesh Raju, P. Satheesh Kumar, T Arun Selvakumar, “Experimentation and process parametric optimization of 3D printing of ABS based polymer parts”, 2nd International Conference on Advances in Industrial Automation and Smart Manufacturing, 26 & 27 July 2019, SREC, Nandyal, India. 

Giridhar D, Ramesh Raju, “Contact stress evaluation of micro-grooving process of alumina ceramic and validation with acoustic emission parameters”, 2nd International Conference on Advances in Industrial Automation and Smart Manufacturing, 26 & 27 July 2019, SREC, Nandyal, India. 

D.Palanisamy, N.Manikandan, Ramesh Raju, D. Arul Kirubakaran, J.S.Binoj, “Application of multiple regression analysis for predicting the performance measures in wire-electrical discharge machining”, 2nd International Conference on Advances in Industrial Automation and Smart Manufacturing, 26 & 27 July 2019, SREC, Nandyal, India. 

J.S.Binoj, N. Manikandan, K.C.Varaprasad, P. Thejasree, Ramesh Raju, “Machinability analysis on wire electrical discharge machining of AA 6061 alloy using taguchi’s approach”, 2nd International Conference on Advances in Industrial Automation and Smart Manufacturing, 26 & 27 July 2019, SREC, Nandyal, India

N. Manikandan, J.S.Binoj, K.C.Varaprasad, P. Thejasree, Ramesh Raju, “Application of Taguchi’s approach for optimizing the Wire-Electrical Discharge Machining of Nickel based Superalloy”, 2nd International Conference on Advances in Industrial Automation and Smart Manufacturing, 26 & 27 July 2019, SREC, Nandyal, India.

Ramesh Raju, Muthukannan Duraiselvam, N. Manikandan, N. Jeyaprakash, S. R. Dhinesh Kumar, “Processing Optimization of Multiple Quality Characteristics on Electrical Discharge Machining of Haste Alloy using TOPSIS”, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems, CDAMIES-2018, 18-20 January 2018, NIT, Trichy, India. 

N. Jeyaprakash, Muthukannan Duraiselvam, Deep Chakravorty, Ramesh Raju, S. R. Dhinesh Kumar, G. Prabu “Microstructure And Wear Resistance Enhancement of Nodular Cast Iron by Laser Surface Melting”, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems, CDAMIES-2018, 18-20 January 2018, NIT, Trichy, India. 

D. Arulkirubakaran, V. Senthilkumar, D. Palanisamy, N. Manikandan, Ramesh Raju, S. Dinesh, C. Velmurugan, “Effect Of Coating And Texturing On Machining Of Grade 5 Ti Alloy Using Semi Solid Lubricant, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems, CDAMIES-2018, 18-20 January 2018, NIT, Trichy, India.

R. Ramesh, P. Obulesu, S. Neeraja, “The Microstructural Evolution Behavior of Nickel Based Super Alloys on Different Coating Techniques - A Review”, 2nd National Conference on Advances in Engineering Management and Sciences (NCAEMS-2018), pp. 395 – 398, 2018, SREC, Nandyal, India.

D. Palanisamy, N. Manikandan, D. Arulkirubakaran, Ramesh Raju, “Comparison On Machining Performance Of Peak-Aged PH Stainless Steel With Various Inserts, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems, CDAMIES-2018, 18-20 January 2018, NIT, Trichy, India.

S.R. Dhinesh Kumar, Muthukannan Duraiselvam, N Manikandan, N. Jeyaprakash, Ramesh Raju, “Investigations On Laser Glazing Of Lanthanum Based TBCs Using Taguchi Approach”, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems, CDAMIES-2018, 18-20 January 2018, NIT, Trichy, India.

Ramesh Raju, N. Manikandan, Madhava Selvan V, K Lakshmi Kala, “Prediction of Performance Measures in Spark Erosion Machining of Haste Alloy Using Multiple Regression Analysis”, International Conference on Advances in Engineering, Management & Sciences, ICAEMS-17, 14 - 15 July 2017, SREC, Nandyal, India.

N. Manikandan, Ramesh Raju, Palanisamy D, D. Arulkirubakaran, S. Sampath Kumar, “Optimization of Laser Metal Deposition Process Parameters using Taguchi based Grey Approach for Ti6Al4V Alloy Coating”, International Conference on Advanced Functional Materials, ICAFM’17, 3 - 5 May 2017, Adhi College of Engineering and Technology, Chennai, India. 

Ramesh Raju, N. Manikandan, Palanisamy D, D. Arulkirubakaran, S. Sampath Kumar, Bhanu Prakash P, “Investigations of Electrical Discharge Machining of Haste Alloy C276 using Taguchi approach”, International Conference on Advanced Functional Materials, ICAFM’17, 3 - 5 May 2017, Adhi College of Engineering and Technology, Chennai, India. 

Ramesh Raju, Baskaran S, K. Ganesa Balamurugan, “Building Integrated Solar Cells for Smart Village: A Best in Class Approach”, International Conference on Smart Cities, ICSC’16, 15 - 17 December 2016, RGMCET, Nandyal, India.

Ramesh Raju, Baskaran S, “A Review of Laser Based Machining Techniques for Nickel alloys”, National Conference on Innovations in Mechanical Engineering, NCIME’16, 21 - 22 October 2016, MITS, Madanapalle, India.

S. Baskaran, V. Anandakrishnan, S. Vinoth Kumar, K. Ganesa Balamurugan, Ramesh Raju “Mathematical Modelling and Experimental Analysis of Coefficient of Friction during Dry Sliding Wear Behavior of Aluminium Metal Matrix Composites”, National Conference on Innovations in Mechanical Engineering, NCIME’16, 21 - 22 October 2016, MITS, Madanapalle, India.

Ganesa Balamurugan. K, S. Baskaran, S. Vinoth Kumar, Ramesh Raju, Dinesh Kumar. R, “A Brief Literature Review on Dissimilar Joining of Al to Mg by Friction Stir Welding”, National Conference on Innovations in Mechanical Engineering, NCIME’16, 21 - 22 October 2016, MITS, Madanapalle, India.

Ramesh Raju, Muthukannan Duraiselvam, Baskaran S, “Research status of metal deposition on Nickel alloys: A review”, National Conference on Design and Manufacturing Technologies for Product Life Cycle, DPLC-2016, 19 - 20 March 2016, BITS Pilani, Hyderabad Campus, India.

Baskaran S, V. Anandakrishnan, R. Ramesh, “Review on Tribological Characteristics of Cutting Tools during machining of Metal Matrix Composites”, National Conference on Design and Manufacturing Technologies for Product Life Cycle, DPLC-2016, 19 - 20 March 2016, BITS Pilani, Hyderabad Campus, India.

Prakash Chellamuthu, Ramesh R, “Modelling and Determination of Optimum Process Parameters for Electrical Discharge Machining of Inconel 718”, International Conference on Technological Advancements in Materials and Manufacturing for Industrial Environment, TAMMIE’16, 4 – 5 March 2016, KPR Institute of Engineering and Technology, Coimbatore, India. 

S. Sambath Kumar, M. Subramanian, R. Ramesh, “Experimental Investigations on Electrical Discharge Machining of Super Alloy using Taguchi based Grey Approach”, International Conference on Technological Advancements in Materials and Manufacturing for Industrial Environment, TAMMIE’16, 4 – 5 March 2016, KPR Institute of Engineering and Technology, Coimbatore, India. 

Ramesh Raju, Muthukannan Duraiselvam, Arun G. K., “Finite Element Modeling and Experimental Investigation of Laser Clad Inconel 718 for Aerospace Structural Materials”, International Conference on Application of Lasers in Manufacturing 2015, Pragati Maidan, 9 – 10 September 2015, New Delhi, India. 

Ramesh Raju, Muthukannan Duraiselvam, Arun G. K, Vijay Petley, Shweta Verma, Rajendran R, “Mechanical and metallurgical characterization of laser metal deposited aero-engine blade materials”, 28th International Conference on Surface Modification Technologies, SMT 28, 16 - 18 June 2014, Tampere University of Technology, Tempere, Finland

Special Issue Guest Editor in International Journal on Interactive Design and Manufacturing (IJIDeM), Springer.

Received certificate of contribution in Reviewing awarded 2024 & 2023, for Sustainability, Applied Sciences, Materials, Metals & Processes Journals by MDPI Journal.

Received certificate of outstanding contribution in Reviewing awarded March 2018, by VACUUM Journal, Elsevier, Amsterdam, The Netherlands.

Awarded Best Academic Non-Circuit Faculty finalist in South Indian ASDF Awards, SIAA 2018, 2018. 

Awarded certification in “Entrepreneurship Education” for successful completion of entrepreneurship course by NEN, Wadhwani Foundation, 2010.

Awarded with “Diamond in the Rough” for excellence in Project work and training the new joines in Retail vertical level at Cognizant Technology Solutions, 2007.

Received Appreciations for an Innovative Design project “Solar Coolers” in ENGINEOUS (Design Contest) SHAASTRA 2005 conducted by IIT MADRAS-Chennai.

Five Day online FDP on INCULCATING UNIVERSAL HUMAN VALUES IN TECHNICAL EDUCATION Organized by All India Council for Technical Education (AICTE) during 17th to 21st June 2024

Five day FDP on CONTEMPORARY PROGRESSIONS, CHALLENGES And ISSUES In METAL 3D PRINTING TECHNOLOGY Organized by Madanappalli Institute of Technology and Science, AP during 19th to 23rd June 2023

Five day Workshop on DEFENCE RESEARCH AND INNOVATION SUMMIT - (DRIS 2023) Organized by Madanappalli Institute of Technology and Science, AP during 24th to 28th May 2023

One-week FDP program on CONTEMPORARY PRACTICES In 3D PRINTING TECHNOLOGY Organized by AICTE IDEA LAB, Sree Vidyanikethan Engineering College, Tirupati during 16th to 22nd September 2022

Five day Workshop on THE ART OF PATENTING AND DRAFTING Organized by Madanappalli Institute of Technology and Science, AP during 25th to 29th April 2022

One-week online ATAL FDP program on PROCESSING OF NOVEL MATERIALS Organized by INDIAN INSTITUTE OF TECHNOLOGY (BHU) VARANASI during 22nd to 26th November 2021

One-week online ATAL FDP program on NOVEL MATERIALS Organized by RAVENSHAW University, Odisha during 1st to 5th November 2021

Three Days online FDP on Nanofludics: Theory, Experimentation, Computation & Applications Organized by Saintgits College of Engineering, Kottayam, Kerala during 13th to 15th September 2021

One-week online AICTE STTP on Technology Enablers for Smart Manufacturing using Industry 4.0 Organized by Nitte Meenakshi Institute of Technology, Bangalore, Karnataka during 12th to 16th July 2021

One-week online ATAL FDP program on The Role of Additive Manufacturing in the Era of Industry 4.0 Organized by Chennai Institute of Technology, TN during 21st to 25th June 2021

One-week online ATAL FDP program on Robotics Organized by Chennai Institute of Technology, TN during 24th to 28th August 2020

One week FDP program on CATIA V5 Chassis Design Organized by APSSDC in association with Dassault systems, AP during 20th to 24th July 2020

One week FDP program on Emerging Research areas in Mechanical Engineering Organized by CMR Technical Campus, Hyderabad during 29th June to 3rd July 2020

One week FDP program on advancements in manufacturing and optimization techniques Organized by Jayamukhi Institute of Technological Science, Warangal during 22nd to 26th June 2020.

One Day Training program on Process simulation, optimization and additive manufacturing for reengineering of automotive modules Organized by NAFEMS, Inida on 11.05.2020

One week FDP program on MOODLE learning management system Organized by IIT Bombay remote center (ABMSPAPCER, Pune) during 4th to 9th May 2020.

One Day Training program on Engineering Simulation and Additive manufacturing for aerospace and defence domains Organized by NAFEMS, Inida on 02.05.2020

One Day Training program on Aerodynamics: A Teaching overview Organized by EDUTECH Webinar series on 28.04.2020

One Day Training program on Fundamentals of Finite Element Analysis Organized by Chennai Institute of Technology, TN on 25.04.2020

Two days workshop on Intellectual Property Rights Organized by Pandit Deendayal Petroleum University from 10.04.2020 to 11.04.2020.

NAAC Awerness Programme on Revised Accreditation Frame Work for Constituent and Affiliated Colleges of JNTUA conducted by JNTUA, Ananthapuramu on 20.01.2020.

Innovative Instructional Stratergies organized by Santhiram Engineering College, Nandyal on 22nd & 23rd May, 2019.

NPTEL SWAYAM - FDP course on Introduction to Machining of Machining Fluids during Jan - April 2019.

Industrial Aspects of Vibration and Overview of Aeroengine organized by Department of Mechanical Engineering, Santhiram Engineering College, Nandyal on 03.02.2018.

Applications of Neural Networks in Materials Science conducted by Department of Mechanical Engineering, Santhiram Engineering College, Nandyal on 06.01.2018.

Recent Advances in Mechanical Engineering conducted by Department of Mechanical Engineering, Santhiram Engineering College, Nandyal on 18.03.2017.

Emerging Materials of Today & Tomorrow organized by School of Mechanical Engineering, RGM College of Engineering & Technology, Nandyal on 15.02.2017.

Advanced Materials and Manufacturing Methods conducted by Department of Metallurgical and Materials Engineering, National Institute of Technology, Tiruchirappalli from 06.06.2016 to 10.06.2016.

CATIA V5 Essentials in Mechanical Engineering conducted by Department of Mechanical Engineering, Madanapalle Institute of Technology & Science, AP from 28.12.2015 to 30.12.2015.

Laser microprocessing for biomedical applications conducted by Department of Production Engineering, National Institute of Technology, Tiruchirappalli on 03.04.2014.

Surface Engineering for Tribological Applications conducted by Department of Production Engineering, National Institute of Technology, Tiruchirappalli from 10.06.2013 to 12.06.2013. 

Production processes for defence applications conducted by Department of Production Engineering, National Institute of Technology, Tiruchirappalli from 27.05.2013 to 01.06.2013. 

Corrosion Control and Surface Engineering conducted by CECASE, National Institute of Technology, Tiruchirappalli from 18.10.2012 to 19.10.2012.

High Impact Teaching Skills conducted by Wipro Mission 10X from 19.12.2011 to 20.12.2011

Research Methodology conducted by Department of Mechanical Engineering, J. J College of Engineering and Technology, Tiruchirappalli on 22.10.2011.

Recent Trends in Welding Technology conducted by Department of Mechanical Engineering, J. J College of Engineering and Technology, Tiruchirappalli on 21.09.2011.

Nano Technology conducted by Department of Production Engineering, J. J College of Engineering and Technology, Tiruchirappalli on 23.09.2011.

Cryogenics and its applications conducted by Department of Mechanical Engineering, J. J College of Engineering and Technology, Tiruchirappalli on 14.08.2010.

Ideas to Execution for Entrepreneurs conducted by Nurthure Talent Academy in collaboration with J. J College of Engineering and Technology, Tiruchirappalli.

Organized

Two days workshop on Robotics with IoT organized at Mohan Babu University, Tirupati from 19.10.2023 to 20.10.2023.

One-week AICTE IDEA Lab FDP on Holistic Innovation in Additive Manufacturing organized at Mohan Babu University, Tirupati from 07.08.2023 to 11.08.2023.

Expert Talk on Casting Process and Techniques organized at Sree Vidyanikethan Engineering College, Tirupati on 19.10.2022.

Expert Talk on 3D Printing Technology in Manufacturing organized at Sree Vidyanikethan Engineering College, Tirupati on 01.07.2022.

Expert Talk on Quality Control and Continuous Improvement in Achieving Manufacturing Excellence organized at Sree Vidyanikethan Engineering College, Tirupati on 25.10.2021.

One-week online FDP on New Age Materials & Technologies organized at Sree Vidyanikethan Engineering College, Tirupati from 04.10.2021 to 08.10.2021.

One-week online FDP on Role of Teachers in Quality Enhancement & Accreditation organized at Santhiram Engineering College, Nandyal from 05.06.2020 to 11.06.2020.

One-week online FDP on Additive Manufacturing: The Research Scopes & Future Trends organized at Santhiram Engineering College, Nandyal from 22.05.2020 to 28.05.2020.

One-week online FDP on Green Manufacturing: The Present & the Future organized at Santhiram Engineering College, Nandyal from 15.05.2020 to 20.05.2020.

One day online FDP on IPR ETHICS & TRIALS IN RESEARCH organized at Santhiram Engineering College, Nandyal on 03.05.2020.

International Conference on Advances in Industrial Automation and Smart Manufacturing organized by Department of Mechanical Engineering, Santhiram Engineering College, Nandyal on 26th & 27th July, 2019 in collaboration with Springer Lecture Notes in Mechanical Engineering.

The Art of Writing Project Proposals & IPR Innovations organized by Department of Mechanical Engineering, Santhiram Engineering College, Nandyal on 22nd & 23rd May, 2019.

Industrial Aspects of Vibration and Overview of Aeroengine organized by Department of Mechanical Engineering, Santhiram Engineering College, Nandyal on 03.02.2018.

Applications of Neural Networks in Materials Science conducted by Department of Mechanical Engineering, Santhiram Engineering College, Nandyal on 06.01.2018.

Recent Advances in Mechanical Engineering conducted by Department of Mechanical Engineering, Santhiram Engineering College, Nandyal on 18.03.2017.

Recent Trends in Welding Technology conducted by Department of Mechanical Engineering, J. J College of Engineering and Technology, Tiruchirappalli on 21.09.2011.

Ideas to Execution for Entrepreneurs conducted by Nurthure Talent Academy in collaboration with J. J College of Engineering and Technology, Tiruchirappalli.

Academic Experience:

ASSOCIATE PROFESSOR in Department of Mechanical Engineering, Faculty of Engineering and Technology, SRM Institute of Science and Technology, Tiruchirappalli Campus, Tiruchirappalli, TN, India from 03.06.2024 to Till Date.

PROFESSOR in Department of Mechanical Engineering, School of Engineering, Mohan Babu University (Erstwhile Sree Vidyanikethan Engineering College), Tirupati, Chittor dist., AP, India from 26.08.2021 to 25.04.2024.

PROFESSOR in Department of Mechanical Engineering, Santhiram Engineering College, Nandyal, Kurnool dist., AP, India from 18.07.2016 to 25.08.2021.

SENIOR ASSISTANT PROFESSOR in Department of Mechanical Engineering, Madanapalle Institute of  Technology & Science, Madanapalle, AP, India from 28.12.2015 to 14.07.2016. 

ASSISTANT PROFESSOR in Department of Mechanical Engineering, J. J College of Engineering and  Technology, Tiruchirappalli, India from 09.06.2010 to 01.02.2012.

Industry Experience:

SOFTWARE ENGINEER in Cognizant Technology Solutions, India & Germany from 07.08.2006 to 28.05.2010.

DESIGN ENGINEER in G. B. Engineering Enterprise Pvt. Ltd., Tiruchirappalli, India from 01.07.2003 to 30.06.2004. 

Research Experience:

FULL TIME RESEARCH SCHOLAR in Department of Production Engineering, National Institute of Technology, Tiruchirappalli, India from 06.02.2012 to 21.12.2015.

• Life Member - The Indian Society for Technical Education (India) - LM-72690
• Life Fellow – Indian Institute of Production Engineers (India) – SLF-10086
• Professional Member – Engineers Without Borders (India) – PFL 172
• Professional Member – SAEINDIA (India) – 7220410564

Projects:

Funded Research Projects: (Worth – Rs. 8.81 Lakhs)

Received a fund of Rs. 8.81 Lakhs from Sreenidhi Raja Packing Solutions Pvt Ltd, Andhra Pradesh for a consultancy project on “Process automation of Manuel punching machine and Rotary punching, Manuel packing machines sections and Semi-automatic Stitching Machines” during 2022 – 2024.